How To Remove Pool Filter Lid
How To Remove Pool Filter Lid. I would use a foot long 2x4 (or any piece of scrap size that fits the tab and the rest of the stuff in the way ) against the plastic tab and gently hit the scrap with a hammer. Please click here to view pump lid removal tools.
Remove the filter clamp and lift off the pool filter lid. Prime the filter pump by removing the strainer housing lid and filling the strainer housing with water; I've used two channel locks on each side wrenching away, hit it with a hammer, tried everything i could that i wasn't going to damage the pump.
You Can Now Remove The Cartridge.
You should then be able to access and remove the. This simple tutorial will ensure you can clean out your pump basket with ease. It sounds like someone over tightened it and/or used a gasket that was worn out.
Here Is A Tool To Make Yourself In Order To Undo Stuck Swimming Pool Filter Tops And The Tops Of Automatic Chlorine Dispensers.
I would use a foot long 2x4 (or any piece of scrap size that fits the tab and the rest of the stuff in the way ) against the plastic tab and gently hit the scrap with a hammer. I've used two channel locks on each side wrenching away, hit it with a hammer, tried everything i could that i wasn't going to damage the pump. Once lid is free of the body, lift lid and locking ring together and place in a clean location.
I Don't Know The Model Number Off The Top Of My Head But It Might Be At A Local Pool Store.
Remove the strainer basket lid and fill the basket with water allowing some water to run through the incoming line. Are you are experiencing difficultly removing the lid from your filtrol160? In this video we will show you the best way to release a stuck lid on your filtro.
Make Sure To Open The Air Relief On The Top Of Your Filter As This Will Help Speed Up The Draining Process.
Unscrew the lid of the filter housing and pull out the filter (it is attached to the lid) remove the filter from the lid by pulling it off. We cannot get the filter lid. Prime the filter pump by removing the strainer housing lid and filling the strainer housing with water;
Sometimes Kicking The Lid With A Glancing Blow In The Direction It's Supposed To Turn Will Loosen It Up.
Allow some water to run through the incoming line. They have to be done up tight. They do sell a tool to remove lids.
Post a Comment for "How To Remove Pool Filter Lid"